Important note: The 4.35 is a non-downgradable firmware. After installation, it is not possible to use 3.36 or 3.18 firmware version anymore.
New DMX Mode
27-Channel DMX Studio Mode for G-4 Wash and G-4 Wash-Beam. The SGM Studio Mode for G-4 Series includes the following features:
16-bit control of Amber LEDs in 2 separate DMX channels
16-bit control of Mint LEDs in 2 separate DMX channels
Color Modes: CTC RGB, CTC RGBAM, CMY, HSI, and XY (CIE 1931)
Dimming Modes: Standard or Incandescent
Plus/Minus Green as a separate DMX channel
Fan speed control (20% to 100%) over DMX
LED Frequency control (3.324 Hz to 265.466 Hz) over DMX
32-Channel DMX Studio Mode for G-4 Wash Motorized Barndoors. The SGM Studio Mode for G-4 Series includes the following features:
16-bit control of Amber LEDs in 2 separate DMX channels
16-bit control of Mint LEDs in 2 separate DMX channels
Color Modes: CTC RGB, CTC RGBAM, CMY, HSI, and XY (CIE 1931)
Dimming Modes: Standard or Incandescent
Plus/Minus Green as a separate DMX channel
Fan speed control (20% to 100%) over DMX
LED Frequency control (3.324 Hz to 265.466 Hz) over DMX
NOTE: The DMX “Studio Mode” is not available in 3.18 or previous firmware versions.
New DMX Chart
DMX_Protocol_G_4_Wash_Washbeam_RGBAM_Rev_8.pdf
Added 27-Channel DMX Studio Mode
DMX Protocol G-4 Motorized Barndoors Rev.1.pdf
Added 32-Channel DMX Studio Mode
Dear
Thank you for signing up for SGM product updates. We will frequently send you updates on the product series of interest to you. We are sending you this e-mail, because we have some new updates we think you might be interested in. If you want to update your preferences, simply fill out the form again, by clicking box below.
